"Pay attention to the world." -- Susan Sontag
 

A Profusion of Irises: Backlit Blooms

From Photographing Flowers: Exploring Macro Worlds by Harold Davis:

“If you can see a flower, it is a source of light. With flowers, this visible light originates elsewhere — with the sun or an artificial light source — and is reflected by the flower…. [Many] flowers also emit electromagnetic waves on frequencies that humans cannot perceive as part of the flower’s strategy for attracting pollinators.

“When we look at a flower, the light sources that illuminate the flower and the interaction of the flower with this light visually sculpt the flower as well as establish the perceptual basis for the extraordinary range of colors in many flowers. As a photographer, light is the medium that I use for capturing flowers, so I like to categorize the issues surrounding light when I am pre-visualizing a flower photo. I think about light direction, intensity, warmth or coolness. The truth is that the quality of light and lighting involves many variables, and is always subjective and elusive. 

“Light direction means the primary direction of the light as it hits the flower. Photos that show flowers as they are ordinarily perceived such as in a plant catalog will likely use front lighting. Side lighting with flowers is a little less usual, and often works well if you are interested in shadows or strong contrasts between lights and darks. 

“I am a big fan of backlighting flowers, because it helps to emphasize transparency of the petals.”

I like backlighting too!

While it’s always interesting to see how cloudy days can soften shadows on outdoor photo subjects, it’s just as much fun to find strategies for getting good shots in full sun — like the backlit (or in a couple of cases, “sidelit”) irises below from one of my trips to Oakland Cemetery. There are some challenges to shooting backlit subjects, not the least of which is: the sun is in your eyes! And since I usually wear my summer disguise — 😎 — on bright days, the world through the camera’s viewfinder can be apocalyptically dark. So I’ve learned to rely on the camera’s clues: the little green box that flashes to the tune of a tiny beep when focus is achieved, the camera’s interpretation of correct exposure, and the histogram … supplemented with a few mystical guesses at the right settings for decent depth-of-field. Using the camera’s burst mode helps also, to increase the chances of getting a fully focused shot if the flower starts bouncing around in a breeze just as I mash the shutter-button. Which is what the flower usually does.

Most of these photos looked pretty lousy when I first imported them into Lightroom — as even with the best camera settings I could come up with, there were still many areas rendered too brightly, or with the background and subject blurred together because of the amount of light on both. From the batch below, here’s one example: a before image showing that the exposure settings I needed to get good color and detail for the flower made the background so bright that it draws your eye right away from the purple bloom.

When I came upon this flower, I thought it had been planted among some spider lilies or yucca — plants that often have long, bi-color leaves — then realized these were leaves of this iris variety, one of the few kinds that doesn’t have single-colored green leaves (see Dalmation Iris). Quite striking, they were, especially in a large patch of the garden, so I wanted to keep the background in a couple of photos since this variety was so unusual.

My goal for this image, then, was to reverse the effect of the bright light by muting the background and lighting up the flower. Since there’s a ton of color and detail in a photo’s RAW file, I was able to use Lightroom’s graduated filters to reduce the background highlights multiple times, then brush some increased exposure, brightness, and lighter shadows on the flower’s petals. The result ended out a lot like it looked in real life: the reflected yellow light from the surrounding leaves gives the impression that the flower is lit from behind.

Select the first image below if you would like to see before and after versions.


Here are the rest. Select any image to see larger versions; then choose “View full size” for a closer look at the color and detail.





The previous posts in this series are:

A Profusion of Irises: Sun-Kissed Shades of Orange

A Profusion of Irises: White Blooms on Black Backgrounds

A Profusion of Irises: Black (Iris) Friday!

A Profusion of Irises: Iris No. 1

Thanks for taking a look! 🙂

A Profusion of Irises: Sun-Kissed Shades of Orange

From The Reason for Flowers: Their History, Culture, Biology, and How They Change Our Lives by Stephen Buchmann:

Historically, flowers have been admired and used decoratively, adding their scents and beauty to our lives. But nineteenth-century women, especially those living in France and England, were caught up in a formalized culture of flowers, often painting elaborate floral scenes. Some claimed that the symbolic meanings given to flowers were an unstated universal language to be studied and used….

“Articles, pamphlets, and entire books on the symbolic language of flowers first appeared in Paris and other French cities around the end of the Napoleonic Wars (1803–15)…. The most important event that codified the language of flowers was the publication of a Parisian book in 1819 by Madame Charlotte de Latour, a pseudonym. Most scholars agree that the author’s real name was Louise Cortambert (1775–1853), the wife of geographer Eugène Cortambert. The Latour book, Le Langage des fleurs, listed flowers by their seasons, and meanings that single blooms or a mixed bouquet would convey between friends or lovers…. 

“Orange-colored flowers signified hope….

According to Wikipedia, there are over thirty shades of orange — and these iris blooms I found in some filtered sunlight at Oakland Cemetery seem to show off many of them. The first gallery positions the irises in their natural surroundings; for the second gallery, I removed all the backgrounds — which gives the swatches of sunlight on each bloom an extra little glow.

Select any image in either gallery to see embiggened versions. You can then choose “View full size” to get a closer look at the color and detail.




The previous posts in this series are:

A Profusion of Irises: White Blooms on Black Backgrounds

A Profusion of Irises: Black (Iris) Friday!

A Profusion of Irises: Iris No. 1

Thanks for taking a look! 🙂

A Profusion of Irises: White Blooms on Black Backgrounds

From “The Onset of Spring” by Elizabeth Lawrence in The Writer in the Garden, edited by Jane Garmey:

“When the daffodils are waning and the tulips coloring, dogwood and pearl bush, flowering almond, snowflakes, and the early white iris are at their best, and trees and trellises are dripping with purple wisteria. Then spring is in full flower with tulips, lilacs, and flowering crab-apples, followed closely by peony, iris, and mock orange.”

From The Reason for Flowers: Their History, Culture, Biology, and How They Change Our Lives by Stephen Buchmann:

“Color is one of the main signaling strategies flowers use to beckon their pollinators. Floral colors also serve as filters, selectively attracting specialist pollinators to certain blooms while eliminating others. For many of those pollinators, the brighter the better, which must be why floral colors, especially those created by the petals, are among the most highly saturated colors found in nature. Technically speaking, saturation is the strength of any given color in relationship to its own brightness. The purest, most highly saturated colors are of one or a few close wavelengths and contain almost no white light (the combination of all wavelengths), while unsaturated colors appear faded or washed-out because white light has diluted the colors. Saturated colors can be equated with their perceived intensity.”

Hello! Below are a few photos of white irises I found while iris-hunting at Oakland Cemetery a couple of weeks ago. Click here or page down to view the galleries.


As I’ve written here before, I use both Lightroom and the Nik Collection for developing my images. My general workflow includes culling RAW images in Lightroom to eliminate those I don’t plan to process, then working through Lightroom panels to adjust sharpness and noise, optimize exposure, remove spots, and improve overall color saturation and luminance. For black-background photos, I use Lightroom graduated filters, radial filters, or brushes to “erase” everything around the subject by reducing exposure, whites, and shadows to remove all the color.

Once I’m satisfied with the appearance of a photo in Lightroom, I edit the image in several Nik Collection tools, using Color Efex Pro to further enhance contrast, color, and detail. The Nik Collection tools don’t update RAW files directly, so on first launch they create a copy of the original RAW file (which is added back into Lightroom). I have a recipe (or preset) in Color Efex Pro for seven filters I use most often:

  • White Neutralizer, which brightens and removes any color cast from whites.
  • Brilliance/Warmth, which enhances individual colors and has a setting called “perceptual saturation” that adds a touch of depth to the image.
  • Tonal Contrast, which affects the color and contrast of image detail in such a way that I often use it to soften backgrounds and make them appear more out-of-focus than they were in the original RAW file.
  • Pro Contrast, which also enhances contrast, but in a way that increases the texture of key details in the image.
  • Darken/Lighten Center, to brighten areas I want to draw your eye to, and darken others (especially color-filled background elements).
  • Reflector Efex, which simulates the effect of directional light from a flash or reflector on selected parts of the image, that I usually use to brighten shadowed areas.
  • Levels & Curves, which provides tone-curve adjustments (similar to those in Lightroom) that I use specifically to remove excess cool-blue color cast that my camera tends to produce.

I seldom use all seven of these; it just depends on the image and what I decide I like while making adjustments with each filter. There is also some overlap between results you can achieve with the Nik Collection and those you can achieve with Lightroom; but the two tools use different techniques for enhancing photos, and (for my purposes) the Nik Collection targets colors in subtle and effective ways that can be very tedious to accomplish in Lightroom. For the photos in the galleries on this post (and for several dozen other iris photos I’ve updated with black backgrounds), I tried to render whites that were nice and crisp, and create color variations that contrasted well with other parts of the photo, and so that you’re eye would register fine lines and details in the shapes of the flowers.

Park all that for a moment.

When I finish post-processing and exporting the photos from Lightroom, I use an app called FileBrowser on my iPad to review every one. I got into that habit a couple of years ago, after discovering that I could find flaws in a photo that I still needed to correct, typically spots that I didn’t notice on my computer monitor or color variations that didn’t look quite right. These perception differences occur because mobile devices use different color spaces and screen resolutions than monitors do, and, of course, it’s easier to inspect an entire photo on a small screen held closer to your eyes than it is on a monitor. With black-backround photos, tiny areas around the edges of the subject or elsewhere in the frame that I missed while brushing in the darkness are much easier to see on the iPad, but I also noticed some artifacts appearing when I created pure black backgrounds that surprised me.

Here’s a screenshot from my iPad showing one of the photos from the galleries below. If you look at the bottom of the image and move your eye up, you’ll see that the black of the iPad screen and the black background of the image are different, and there are slightly off-black horizontal pixels running from the bottom toward the middle of the photo and, less obvious, a halo around the flower itself.

At first I thought it was just my eyes reacting to the contrast between the white flower and black background, or the iPad’s overall brightness, or the room lighting, or maybe a ghost in the machine. I had completed about fifty black-background photos of Oakland irises for this ongoing project, though, and found the off-black shading on all of them — with the intensity (especially of the halo effect around the flowers) varying quite a bit, but very evident on many of the photos. And, you know, some things you see you just can’t unsee … so I decided to try and figure out why this shading was occurring.

Here’s the RAW image in Lightroom after I completed exposure and color adjustments and darkened the background, with the exposure cranked way up so I could determine if the ghosting was occurring in Lightroom. As you can see, the background is pure black, showing no artifacts.

Here’s the same image, after passing it into the Nik Collection’s Color Efex Pro and returning it to Lightroom, also with exposure cranked up. Here you can see the artifacts clearly: the shift to light gray running from the bottom of the photo to the middle, and the concentric halos around the flower.

So now I knew that Color Efex Pro was creating the ghosting effect; but since I had applied as many as seven of the filters to each photo, I didn’t know which one was responsible. To figure that out, I started over with a couple of the photos, passing each one through Color Efex Pro, applying only one filter on each pass, then checking the results in Lightroom — and determined that the horizontal shading running from the bottom up was from the Reflector Efex filter, and the concentric halos came from White Neutralizer.

I interpret this — possibly inaccurately — to mean that these two filters are altering the red, blue, and green pixels (especially evident on the halos) to create their effects, gradually decreasing in intensity as they transition away from the targeted part of the photo. If the background wasn’t black — meaning, if it still contained colorful elements in shades of red, blue, and green — then the filters would simply alter the intensity of those colors and not show any sad effects. Having learned what causes this ghosting, I need to avoid using these two filters on my black-background images… which also means I need to re-process about 40 photos — argh! — so am headed back into my “darkroom”. See you in a couple of days! 🙂


Select the first image from each set to see larger versions; and try “View full size” if you would like to get a closer look at the color and detail.






The previous posts in this series are:

A Profusion of Irises: Black (Iris) Friday!

A Profusion of Irises: Iris No. 1

Thanks for reading and taking a look! 🙂

A Profusion of Irises: Black (Iris) Friday!

Hello! Below are a few photos of black irises I found near the entrance to Oakland Cemetery while on my recent photo-trips. As you can see from the photos, even though it’s a called a “black iris” there are threads of purple, magenta, and dark blue running through all the petals. In brighter spots — as shown in the first two photos — yellow sunlight emphasizes the intensity of the purple and magenta shades; whereas those more shielded from the sun — where the light shifts to cooler colors — show blue highlights instead.

Select the first image to see a larger version; and try “View full size” if you would like to get a closer look at the color and detail.



The previous post in this series is:

A Profusion of Irises: Iris No. 1

Thanks for taking a look! 🙂

A Profusion of Irises: Iris No. 1

Haiku by Matsuo Basho in The Reason for Flowers: Their History, Culture, Biology, and How They Change Our Lives by Stephen Buchmann:

Come on let us see
all the real flowers of this
sorrowful world.

After the dream
how real
this iris!


I’ve made enough progress with post-processing iris photos I took at Oakland Cemetery in April that I decided I would start posting some of them. Well, in this case, one of them. This beauty produced a huge blossom, about six inches across at its widest points; and if you stare at it long enough, you may feel like it’s in motion, the petals waving at you in a spring breeze. The colors — blends of dominant purple shaded with blue — are the most common iris colors, and this flower’s large size shows them off well.

Select the image to see a larger version; and try “View full size” if you would like to get a closer look at the color and detail.



Because many of the iris blooms were so large, I used narrow apertures (f/14 or higher) to get as much of the bloom (from front to back) in focus as possible. Doing so brings in a lot more background elements at the same time, of course, so as I’ve been working through the photos, I’ve made decisions about whether to keep the background as shot (which works well for an isolated bloom or a bloom and its leaves), blur it (which you will see in some future posts), or remove it entirely. The iris shapes and colors fare really well against total black, so I picked out about half of the 120 photos for background removal — despite how long it takes to “unmask” the twists and turns of the flower petals and get the final result right.

Below are side-by-side variations showing the original image of the iris, followed by the black-background version. I used Lightroom’s spot removal tool to repair some defects in the petals, though happily didn’t have to spend too much time deleting offending pollen bloblets from the flower. I also made exposure and color adjustments in Lightroom — and applied some contrast and detail filters in the Nik Collection — to lighten excess blue shades (partly a darkening or saturating effect from using narrower apertures) and add a bit of additional texture. To remove the background, I dragged a Graduated Filter across the entire image; set Exposure, Contrast, Highlights, Shadows, Whites, and Blacks as shown below; then used the Erase brush to reveal the bloom while leaving the background black.

Select the first image if you would like to compare the before and after renderings.


One down, 120 to go! Thanks for reading and taking a look! 🙂